3M Window Weld Motor Mounts:
My motor mounts were not in good shape and I was not about to try to put hockey pucks in so I did the next best thing. I got a tube of 3M Window Weld from Amazon for under $20 and followed these instructions. I only used one tube but it was barely enough so i would suggest getting the two that it says in the instructions.
248/248 Cam Swap:
While doing my motor mounts I decided to drop in the extra 248 cam I got from a friend. The main thing to look for when doing this is do some research on the Ka's timing. How it should work and you will be able to do cam swaps in 20 minutes in no time. When you are at TDC rotate the new cam 3 teeth Counter Clock Wise until the front cam lobes facing away from each other horizontally. Step by Step instructions
While doing my motor mounts I decided to drop in the extra 248 cam I got from a friend. The main thing to look for when doing this is do some research on the Ka's timing. How it should work and you will be able to do cam swaps in 20 minutes in no time. When you are at TDC rotate the new cam 3 teeth Counter Clock Wise until the front cam lobes facing away from each other horizontally. Step by Step instructions
No comments:
Post a Comment